Screen Status Read Commands; Cr_Screen Command; Cr_Kystnmode Command; Cr_Ceil Command - Sanyo PLV-WF20 - 6000 Lumens Manual

PLV-WF20 Expand Serial Command Functional Specifications

9.8 Screen Status Read Commands

9.8.1 CR_SCREEN Command

Command "CR_SCREEN" [CR]
Details Get currently selected screen image size
Acceptable
Response
Unacceptable

9.8.2 CR_KYSTNMODE Command

Command "CR_KYSTNMODE" [CR]
Details Get setting status of Keystone Store Mode
Acceptable
Response
Unacceptable

9.8.3 CR_CEIL Command

Command "CR_CEIL" [CR]
Details Get setting status of Ceiling
Acceptable
Response
Unacceptable

9.8.4 CR_REAR Command

Command "CR_REAR" [CR]
Details Get setting status of Rear function
Acceptable
Response
Unacceptable

9.8.5 CR_VSCALE Command

Command "CR_VSCALE" [CR]
Details Get setting status of V scale
Acceptable
Response
Unacceptable
"000_%1" [CR]
"NORMAL" ---------------------- Normal mode
"ZOOM" -------------------------- Zoom mode
"NATURAL" --------------------- Natural wide mode
%1 "WIDE" --------------------------- Wide mode
"FULL" --------------------------- Full mode
"TRUE" --------------------------- True mode
"CUSTOM" ----------------------- Custom mode
"Error Code" [CR] -------------- When command is invalid in the
given condition (such as being selected input)
"?" [CR] ----------------------- When unknown command is received
"000_%1" [CR]
"STR" ---------------------- Store mode is "Store"
%1
"RST" ---------------------- Store mode is "Reset"
"?" [CR] -------------------- When unknown command is received
"000_%1" [CR]
"ON" --------------------------- Ceiling projection is enabled
%1
"OFF" ------------------------- Ceiling projection is disabled
"Error Code" [CR]
"000_%1" [CR]
"ON" --------------------------- Rear projection is enabled
%1
"OFF" ------------------------- Rear projection is disabled
"Error Code" [CR]
"000_%1" [CR]
%1 "-32"－"035"
"Error Code" [CR]
54/68