Appendix A Factory Defaults And Technical Specifications; Factory Default Settings - NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual

Factory Default Settings

You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
• To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in Table A-1 below.
• Pressing the reset button for a shorter period of time will simply cause your device to reboot.
Table A-1. Access Point Default Configuration Settings
Feature
AP Login
User Login URL
User Name (case sensitive)
Login Password (case sensitive)
Ethernet Connection
Static IP Address
Ethernet MAC Address
Port Speed
Local Network (LAN)
Lan IP
Subnet Mask
Gateway Address
DHCP Server
DHCP Client
Time Zone
Factory Defaults and
Technical Specifications
Description
192.168.0.228
admin
password
192.168.0.210
See bottom label.
10/100
192.168.0.228
255.255.255.0
0.0.0.0
Disabled
Disabled
GMT
v4.0, April 2006
Appendix A
A-1