Management; Remote Management - NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual

This chapter describes how to use the management features of your ProSafe 802.11g Wireless
Access Point . To access these features, connect to the WG302 as described in
the Default IP Address" on page
Information headings in the Main Menu of the browser interface.

Remote Management

Both the Remote Console and SNMP are enabled by default which allows for remote management
of the WG302 from a from a secure Telnet console as well from a client running SNMP
Management software.
To set up a Remote Management interface:
1. Under Management on the main menu, select Remote Management. The Remote Management
screen will display.
Figure 3-1.
2-8. Then select the category under either the Management or
v4.0, April 2006
Chapter 3

Management

"Logging in Using
3-1