NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual
•
Wireless LAN parameters. The default advanced wireless LAN parameter settings usually
work well. However, if you want the WG302 to operate in Super-G mode, use this feature
To set up Advanced Wireless Settings:
1. From the main menu under Advanced, Select Advanced Wireless Settings. The Advanced
Wireless Settings screen will display.
Figure 4-3.
2. Wi-FI Multimedia (WMM) is disabled (No) by default. Select the Yes radio button to enable
WMM support.
3. Enable the Wireless LAN Parameters by checking the Yes radio button and entering the
appropriate information in the fields described in
Table 4-1. Advanced Wireless LAN Settings Fields
Field
Enable SuperG Mode
RTS Threshold
Fragmentation Length
4-4
Description
Click Enable to enable SuperG Mode.
The packet size used to determine whether it should use the CSMA/CD
(Carrier Sense Multiple Access with Collision Detection) or the CSMA/CA
(Carrier Sense Multiple Access with Collision Avoidance) mechanism for
packet transmission. The default is 2346.
This is the maximum packet size used for fragmentation. Packets larger
than the size programmed in this field will be fragmented. The Fragment
Threshold value must be larger than the RTS Threshold value. The default
is 2346.
v4.0, April 2006
Table
4-1, below.
Advanced Configuration