NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual page 30

NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual
• Select the Documentation link under the Web Support menu to view support information
or the documentation for the wireless access point.
• Click Logout to exit the user interface (the wireless access point will wait 5 minutes after
no activity before it automatically logs you out.
4. Select Basic Settings to view the Basic Settings menu and configure the settings appropriate
for your network (The default settings are usually adequate for most situations; see
Basic IP Options" on page 2-9
5. Enable 802.1Q VLAN, if required. (This option is only useful if the hubs/switches on your
LAN support the VLAN 802.1Q standard. If so, you can enable this feature.
Figure 2-3.
6. Select Wireless Settings from the Setup section of the main menu to view the Wireless Settings
screen. One of the Wireless Settings screen shown in
United States, the Country/Region is preset; the Country/Region must be selected in the rest of
the world.)
2-6
for guidance on changing these settings).
v4.0, April 2006
Figure 2-4 below will display. (In the
Basic Installation and Configuration
"Setting