Hotspot Settings; Advanced Wireless Settings - NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual

NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual
• Secondary WINS Server. The Access Point will assign this IP address as the secondary
WINS Server used by the connected wireless stations.
• Lease. The lease time for the assigned IP address. The wireless client user is required to
renew the IP address as soon as the lease is expired.
4. Click Apply to save your settings.

Hotspot Settings

If you want the wireless access point to capture and redirect all HTTP (TCP, port 80) requests, use
this feature. For example, a hotel might want all wireless connections to go to its server to start a
billing transaction.
Figure 4-2.
To set up a Hotspot server:
1. From the main menu under Advanced, select Hotspot Settings:
2. Check the Enable HTTP Redirect radio button.
3. Enter the URL of the Web server where you wish to redirect HTTP (port 80) requests.
4. Click Apply. All port 80 requests will now be redirected to the specified URL.

Advanced Wireless Settings

The Advanced Wireless Settings menu is used to configure the following:
• Wi-Fi multimedia (WMM). WMM (Wireless Multimedia) is a subset of the 802.11e
standard. WMM allows wireless traffic to have a range of priorities, depending on the kind of
data. Time-dependent information, such as video or audio, will have a higher priority than
normal traffic. For WMM to function correctly, wireless clients must also support WMM.
Advanced Configuration
v4.0, April 2006
4-3