NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual page 4

802.11g wireless access point
Hide thumbs Also See for WG302 - 802.11g ProSafe Wireless Access Point:
Table of Contents

Advertisement

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Warning for North America, and Australia
Warning! To meet FCC and other national safety guidelines for RF exposure, the antennas for this device (see below)
must be installed to ensure a minimum separation distance of 20cm (7.9 in.) from persons. Further, the antennas shall not
be colocated with other antenna or radio transmitter.
Antenna Statement for North America and Australia
In addition to its own 2 antennas, the WG302 device has been approved for use with the following detachable antennas
and antenna cables:
Approved
Antenna Gain and
Antennas
type
NETGEAR
18 dBi, directional
ANT24D18
outdoor/indoor
NETGEAR
9 dBi, omnidirectional
ANT2409
outdoor/indoor
NETGEAR
5 dBi, ceiling/wall
ANT24O5
indoor
*WG302 maximum radiated power in North America and Australia: 20 dBm – cable loss + antenna gain
Please go to
www.netgear.com/go/wg302_fcc
WG302 in North America and Australia.
Industry Canada Compliance Statement
This Class B Digital apparatus meets all the requirements of the Canadian Interference Causing Equipment Regulations
ICES 003.
Cet appareil numerique de classe B respecte les exigences du reglement du Canada sur le materiel brouilleur NMB-003.
The device is certified to the requirements of RSS-210 for 2.4 GHz spread spectrum devices. The use of this device in a
system operating either partially or completely outdoors may require the user to obtain a license for the system according
to the Canadian regulations. For further information, contact your local Industry Canada office.
iv
Approved Antenna
Cable
NETGEAR
ACC-10314-01 thru 05
NETGEAR
ACC-10314-01 thru 05
NETGEAR
ACC-10314-01 thru 05
for an updated list of wireless accessories approved to be used with the
v4.0
,
May 12, 2006
Antenna Cable
Maximum
Length
Transmitted Power
1.5 m to 30 m
19 dBm + 18 dBi ant.
1.5 m to 30 m
19 dBm + 9 dBi ant.
1.5 m to 30 m
19 dBm + 5 dBi ant.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wg302v1 - prosafe 802.11g wireless access point

Table of Contents