NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual page 74

NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual
.
Figure 4-1.
3. Configure the following TCP/IP configurations for using the WG302 as a DHCP server for
wireless clients.
• Starting IP Address. Enter the starting IP address that can be assigned from the DHCP
server on this Access Point.
• Ending IP Address. Enter the Ending IP address that can be assigned from the DHCP
server on this Access Point
• Subnet Mask. The Access Point will assign the specified subnet mask to the connected
wireless stations.
• Gateway Address. The Access Point will assign this IP address as the default gateway for
any traffic beyond the local network.
• Primary DNS Server. The Access Point will assign this IP address as the primary
Domain Name Server used by the connected wireless stations.
• Secondary DNS Server. The Access Point will assign this IP address as the secondary
Domain Name Server used by the connected wireless stations.
• Primary WINS Server. The Access Point will assign this IP address as the primary
WINS Server used by the connected wireless stations.
4-2
v4.0, April 2006
Advanced Configuration