Stp Root Secondary - 3Com 5500-EI PWR Reference Manual

Hide thumbs Also See for 5500-EI PWR:
Table of Contents

Advertisement

stp root secondary

Syntax
stp [ instance instance-id ] root secondary [ bridge-diameter bridgenum
centi-seconds ] ]
undo stp [ instance instance-id ] root
View
System view
Parameters
instance-id: MSTI ID ranging from 0 to 16. The value of 0 refers to the CIST.
bridgenum: Network diameter of the specified spanning tree. This argument ranges from 2 to 7 and
defaults to 7.
centi-seconds: Hello time in centiseconds of the specified spanning tree. This argument ranges from
100 to 1,000 and defaults to 200.
Description
Use the stp root secondary command to configure the current switch as a secondary root bridge of a
specified MSTI.
Use the undo stp root command to cancel the current configuration.
By default, a switch does not operate as a secondary root bridge.
If you do not specify the instance-id argument, the two commands apply to only the CIST.
You can configure one or more secondary root bridges for an MSTI. If the switch operating as the root
bridge fails or is turned off, the secondary root bridge with the least MAC address becomes the root
bridge.
You can specify the network diameter and the hello time of the switch when you are configuring it as a
secondary root bridge. The switch will then figure out the other two time parameters: forward delay and
max age. If the instance-id argument is specified to 0 in this command, the current switch is configured
as the secondary root bridge of the CIST. You can configure only one root bridge for an MSTI but you
can configure one or more secondary root bridges for an MSTI.
Once a switch is configured as the root bridge or a secondary root bridge, its priority cannot be modified.
Examples
# Configure the current switch as a secondary root bridge of MSTI 4, setting the network diameter of the
switched network to 5 and the hello time of the current switch to 300 centiseconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] stp instance 4 root secondary bridge-diameter 5 hello-time 300
1-37
[ hello-time

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

5500-ei series

Table of Contents