LED
pur-
pose
Fast-flashing amber (on
1/2 second, then off 1/2
second)
Alternating green/amber
Monitoring Control Processor blade (CP8) status
To determine the status of a CP8 blade:
1.
Check the LED indicators on the CP blade (see
change during POST and other diagnostic tests. For information about how to interpret the LED
patterns, see
2.
Check port blade status by typing slotShow and haShow.
160
Monitoring DC04 SAN Director system components
Color
Transceiver or port is faulty.
Port is bypassed
Table
31.
Status
Change transceiver or reset switch
from workstation.
Reset port from workstation using the
portEnable or portCfgPersist-
entEnable command.
Figure
58). The LED patterns may temporarily
Recommended action