Dc04 San Director Log In And Configuration; Configuration Overview; Establishing A Serial Connection And Logging On To The Dc04 San Director - HP A7533A - Brocade 4Gb SAN Switch Base Hardware Reference Manual

Hp storageworks dc and dc04 san backbone director switches hardware reference guide (5697-7814, february 2009)
Hide thumbs Also See for A7533A - Brocade 4Gb SAN Switch Base:
Table of Contents

Advertisement

8 DC04 SAN Director log in and
configuration
This chapter provides the following information:
• "Configuration
• "Establishing a serial connection and logging on to the DC04
• "Configuring IP
• "Establishing an Ethernet
• "Customizing a switch
• "Setting the domain
• Setting the date and time
• "Verifying the Port Identifier mode and connecting to the
• "Enabling software
• "Backing up the

Configuration overview

The DC04 SAN Director must be configured before it is connected to the fabric. All configuration
commands must be entered through the active CP blade. The DC04 SAN Director configuration
includes the following parameters:
IP address and subnet mask for the chassis
IP addresses, host names, subnet masks, and gateway addresses for both CP blades
Switch name
Domain ID for the DC04 SAN Director (optional)
WWN for the DC04 SAN Director
The DC04 SAN Director WWN is initially set by the factory to match the license ID (which is based
on the chassis serial number). The WWN can be changed but the license ID cannot be modified.
The configuration information is mirrored to the standby CP blade, which allows the current
configuration to remain available even if the active CP blade fails. The configuration information for
the DC04 SAN Director is stored in the WWN cards and the flash memory of the CP blades. The
configuration can be backed up to a workstation (uploaded) and then downloaded to the active CP
blade if necessary.
Establishing a serial connection and logging on to the DC04
SAN Director
To establish a serial connection and log on to the DC04 SAN Director:
overview" on page 145
addresses" on page 147
connection" on page 148
name" on page 149
ID" on page 149
licenses" on page 152
configuration" on page 152
HP StorageWorks DC and DC04 SAN Backbone Director Switches
Director" on page 145
fabric" on page 151
145

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ae370a - brocade 4gb san switch 4/12

Table of Contents