A Technical Specifications; General Specifications; Power Cords - HP A7533A - Brocade 4Gb SAN Switch Base Hardware Reference Manual

A Technical specifications

This appendix provides information for both the DC SAN Director and the DC04 SAN Director.
Differences in specifications between the products is indicated. The following information is included:
• "General
• "System architecture" on page 210
• "System size and
• "System blade and FRU
• "Facility requirements" on page 214
• "Power specifications" on page 215
• "Power cords" on page 216
• "Environmental
• "Fibre Channel port
• "Data transmission

General specifications

The DC SAN Director and DC04 SAN Director are compliant with United States and International
safety and Electromagnetic Compatibility (EMC) Electromagnetic Compatibility standards.
lists the general specifications for the DC SAN Director and DC04 SAN Director.
Table 41 General specifications
Specification
Configurable port types
System architecture
System processor
ANSI fibre channel protocol
Modes of operation
Fabric initialization
FC-IP (IP over fibre channel)
Aggregate I/O bandwidth
Port to port latency
specifications" on page 209
weight" on page 213
weights" on page 214
requirements" on page 219
specifications" on page 220
ranges" on page 222
HP StorageWorks DC and DC04 SAN Backbone Director Switches
Description
F_Port, FL_Port, E_Port, EX_Port, VEX_Port, VE_Port, and M_Port
Nonblocking shared memory
FreeScale 8548, 1.2 GHz
FC-PH (Fibre Channel Physical and Signalling Interface standard)
Fibre Channel Class 2, Class 3, and Class F
Complies with FC-SW 5.0
Complies with FC-IP 2.3 of the FCA profile
DC SAN Director: 6144 Gb/s, end-to-end
DC04 SAN Director: 3 Tbps per chassis
Less than 2 microseconds with no contention (destination port is
free)
Table 41
209