Cable Routing Table; Cable Routing Table For Dc04 San Director (48 Ports Shown) - HP A7533A - Brocade 4Gb SAN Switch Base Hardware Reference Manual

3. Resolve any issues or unintentional changes to the DC04 SAN Director or fabric.
• If there are any mechanical problems, try reseating the associated component.
• If the configuration information is not correct for the DC04 SAN Director, modify as required.
If necessary, the configuration saved before the replacement can be downloaded using the
configDownload command.
The configDownload command can be entered through a Telnet or serial session, but the
DC04 SAN Director must have an Ethernet connection to the server name or IP of the host
for the download process to complete. For more information, refer to the help configdown-
load command or the Fabric OS Command Reference.
rsl8-st03-dcx-1:admin> configdownload
Server Name or IP Address [host]: 123.123.123.123
User Name [None]: Admin24
File Name [config.txt]: config-switch.txt
Password: xxxxxxxx
download complete
rsl8-st03-dcx-1:admin>
• If other issues exist, contact HP.

Cable routing table

Table 40 is a 48-port template for a cable-routing table. Expand the table for the number of ports in
the DC04 SAN Director.
Table 40 Cable routing table for DC04 SAN Director (48 ports shown)
Slot/port
Slot
206 Replacing DC04 SAN Director field-replaceable units (FRUs)
Cable labels
Port Switch end
0
1
2
3
4
5
6
7
8
9
10
11
12
Connected
device
Device end
Slot/port of
device