Monitoring Stack Status - HP PROCURVE 2610 Advanced Traffic Management Manual

ProCurve Stack Management
Configuring Stack Management
4. To display Stack Configuration menu for the switch you are moving, select
5. Press
6. Use the Space bar to select Member, then press [v] to move to the Com­
7. Enter the MAC address of the destination Commander and press
8. Press

Monitoring Stack Status

Using the stacking options in the menu interface for any switch in a stack, you
can view stacking data for that switch or for all stacks in the subnet (broadcast
domain). (If you are using VLANs in your stack environment, see "Stacking
Operation with a Tagged VLAN" on page 8-45.) This can help you in such ways
as determining the stacking configuration for individual switches, identifying
stack Members and Candidates, and determining the status of individual
switches in a stack. See table 8-5 on page 8-26.
Table 8-5. Stack Status Environments
Screen Name
Stack Status (This Switch)
Stack Status (All)
8-26
3. Stack Configuration
(for Edit) to select the Stack State parameter.
[E]
mander MAC Address field.
(for Save).
[S]
Commander
• Commander's stacking
configuration
• Data on stack Members:
– Switch Number
– MAC Address
– System Name
– Device Type
– Status
Lists devices by stack name
or Candidate status (if device
is not a stack Member).
Includes:
• Stack Name
• MAC Address
• System Name
• Status
Member
• Member's stacking configurati
• Member Status
• Data identifying Member's
Commander:
– Commander Status
– Commander IP Address
– Commander MAC Address
Same as for Commander.
.
[Enter]
Candidate
on Candidate's stacking
configuration
Same as for
Commander.