System Blade And Fru Weights; Facility Requirements; System Fru Weights - HP A7533A - Brocade 4Gb SAN Switch Base Hardware Reference Manual

System
Empty chassis:
• No blades
• No CP blade
• No core switch blade
• No power supplies
• No fan assemblies

System blade and FRU weights

Table 46 System FRU weights
FRU
CP blade (CP8)
CR blade (CR8, CR4S-8)
FC8-16 port blade
FC8-32 port blade
FC8-48 port blade
FC10-6 port blade
FR4-18i application blade
Port card filler panel
Power supply
Blower assembly
WWN bezel
Cable management comb (DC SAN Director)
Vertical cable management fingers (DC04 SAN
Director)
WWN bezel
Chassis door

Facility requirements

The facility where the product is in use must meet the following requirements to provide for correct
operation:
• Adequate supply circuit, line fusing, and wire size, as specified by the electrical rating on the
chassis nameplate
• An air flow of at least 350 cubic feet per minute (595 cubic meters per hour) in the immediate
vicinity of the DC SAN Director or DC04 SAN Director
214 Technical specifications
Size and weight
25.76 kg (56.8 lb.)
Weight
3.0 kg (6.6 lb.)
3.27 kg (7.2 lb.)
3.0 kg (6.6 lb.) without media
3.27 kg (7.2 lb.) without media
3.36 kg (7.4 lb.) without media
3.1 kg (6.8 lb) without media
3.36 kg (7.4 lb) without media
1.5 kg (3.2 lb)
2.45 kg (5.4 lb.)
5.73 kg (12.6 lb.)
0.3 kg (0.6 lb)
0.45 kg (1.0 lb.)
0.45 kg (1.0 lb.)
0.3 kg (0.6 lb.)
2.09 kg (4.6 lb.)