Figure 25 WWN bezel (logo plate)
1. CP blade Status (above) and Power (below) LEDs
3. Port blade Status (above) and Power (below) LEDs
Table 15
describes the WWN card LED patterns and the recommended actions for those patterns.
Table 15 WWN bezel LED descriptions
LED purpose
Port blade/CP blade/ CR
blade Power
Port blade/CP blade/ CR
blade Status
NOTE:
If a blade slot or power supply bay has a filler panel installed, the corresponding LEDs on the WWN
blade do not light up.
72
Monitoring DC SAN Director system components
2. CR blade Status (above) and Power (below) LEDs
4. Slot numbers
Color
Status
Steady green
Power is OK.
Steady amber
Blade is faulty.
No light (LED is OFF)
Blade is OK.
1
2
3
4
26399a
Recommended action
No action required
Check blade.
No action required