Virtual Vlans: Create An Ip Subnet Based Vlan - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch Software Administration Manual
7000 series managed switch administration guide for software version 8.0.3
Hide thumbs
Also See for GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch:
- User manual (628 pages) ,
- Cli manual (788 pages) ,
- Hardware installation manual (39 pages)
Table of Contents
Advertisement
ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
a.
From the main menu, select Switching > VLAN >Advanced > Protocol Based VLAN Group
Membership. A screen similar to the following displays
Figure 1-17
b. Select the 2 in the Group ID field.
c.
Click on the gray box under port 11. One flag appears in the box.
d. Click Apply.
Virtual VLANs: Create an IP Subnet Based VLAN
In an IP subnet based VLAN, all the end workstations in an IP subnet are classified to the same VLAN. In
this VLAN, users can move their workstations without reconfiguring their network addresses. IP subnet
VLANs are based on layer 3 information from packet headers. The switch makes use of the network-layer
address (for example, subnet address for TCP/IP networks) in determining VLAN membership. If a packet
is untagged or priority-tagged, the switch will associate the packet with any matching IP subnet-
classification. If no IP subnet classification can be made, the packet is subjected to the normal VLAN
Virtual LANs
v1.0, June 2010
1-15
Advertisement
Table of Contents
