Add The Ports To The Lags - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch Software Administration Manual

ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
Web Interface: Creating Two LAGs
To use the Web interface to configure the managed switch, proceed as follows:
1. Create LAG lag_10.
a. From the main menu, select Switching > LAG >LAG Configuration. A screen similar to the
following displays.
Figure 2-2
b. In the Lag Name field, enter lag_10.
c. Click the Add.
2. Create LAG lag_20.
a. From the main menu, select Switching > LAG >LAG Configuration. A screen similar to the
following displays.
Figure 2-3
b. in the Lag Name field, enter lag_20.
c. Click Add.

Add the Ports to the LAGs

The example is shown as CLI commands and as a Web interface procedure.
Link Aggregation
v1.0, June 2010
2-3