About This Manual - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch Software Administration Manual
7000 series managed switch administration guide for software version 8.0.3
Hide thumbs
Also See for GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch:
- User manual (628 pages) ,
- Cli manual (788 pages) ,
- Hardware installation manual (39 pages)
Table of Contents
Advertisement
The information in this manual is intended for readers with intermediate computer and Internet skills.
Note: Product updates are available on the NETGEAR website at
Before installation, read the Release Notes for this switch product. The Release Notes detail the platform
specific functionality of the Switching, Routing, SNMP, Config, Management, and other packages. In
addition, see the following publications:
•
The NETGEAR installation guide for your switch
•
Hardware Installation Guide
•
Software Setup Guide
•
NETGEAR CLI Reference for the Prosafe 7X00 Series Managed Switch. Refer to the Command Line
Reference for information for the command structure. There are three documents in this series; choose
the appropriate one for your product.
–
The Command Line Reference provides information about the CLI commands used to configure the
switch and the stack. The document provides CLI descriptions, syntax, and default values.
–
The FASTPATH Command Reference provides information about the CLI commands used to
configure the switch. The document provides CLI descriptions, syntax, and default values.
These documents may be found at
http://www.NETGEAR.com
v1.0, June 2010
About This Manual
http://kbserver.netgear.com
.
.
xi
Advertisement
Table of Contents
