ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
use to configure the switch as shown in the diagram.
Port 1/0/2 VLAN
Router Port 1/3/1
192.150.3.1
Layer 2
Switch
VLAN 10
Figure 1-1
The following examples show how to create VLANs, assign ports to the VLANs, and assign a VLAN as the
default VLAN to a port.
Create Two VLANs
The example is shown as CLI commands and as a Web interface procedure.
CLI: Creating Two VLANS
Use the following commands to create two VLANs and to assign the VLAN IDs while leaving the names
blank.
(Netgear Switch) #vlan database
(Netgear Switch) (Vlan)#vlan 2
(Netgear Switch) (Vlan)#vlan 3
(Netgear Switch) (Vlan)#exit
Web Interface: Creating Two VLANS
To use the Web interface to configure the managed switch, proceed as follows:
1-2
Layer 3 Switch
Port 1/0/3 VLAN
Router Port 1/3/2
192.150.4.1
Port 1/0/1
Layer 2
Switch
v1.0, June 2010
VLAN 20
Virtual LANs