NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch Software Administration Manual page 154

ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
a. From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar to the
following displays.
Figure 9-24
b. Enter the following information in the VLAN Routing Wizard:
• In the Vlan ID field, enter 200.
• In the IP Address field, enter 192.168.200.2.
• In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.
d. Click the gray box under port 48 twice until U displays. The U specifies that the egress packet is
untagged for the port.
e. Click Apply to save VLAN 200.
4. Create a static route with IP address 192.168.100.0/24:
a. From the main menu, select Routing > Routing Table > Basic > Route Configuration. A screen
similar to the following displays.
Access Control Lists (ACLs)
v1.0, June 2010
9-24