NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch Software Administration Manual page 118

ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
a. From the main menu, select Routing > IPv6 > IPv6 Global Configuration. A screen similar to the
following displays.
Figure 6-51
b. Next to the IPv6 Unicast Routing Mode, select the Enable radio button.
c. Click Apply to save the settings.
2. Specify the Router ID and Enable OSPFv3 for the switch.
a. From the main menu, select Routing > OSPFv3 > Basic> OSPFv3 Configuration. A screen similar
to the following displays.
Figure 6-52
b. Under the OSPF Configuration, enter the following information:
• In the Router ID, enter 1.1.1.1
• Next to the Admin Mode, select the Enable radio button.
c. Click Apply to save the settings.
3. Enable IPv6 on the port 1/0/1.
OSPF
v1.0, June 2010
6-43