Create Two Lags - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch Software Administration Manual
7000 series managed switch administration guide for software version 8.0.3
Hide thumbs
Also See for GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch:
- User manual (628 pages) ,
- Cli manual (788 pages) ,
- Hardware installation manual (39 pages)
Table of Contents
Advertisement
ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
Create Two LAGs
The following figure shows the example network.
Port 1/0/3
LAG_10
Port 1/0/2
LAG_10
Server
Layer 3 Switch
Layer 2 Switch
Subnet 2
Figure 2-1
CLI: Creating Two LAGs
(Netgear Switch) #config
(Netgear Switch) (Config)#port-channel lag_10
(Netgear Switch) (Config)#port-channel lag_20
(Netgear Switch) (Config)#exit
Use the show port-channel all command to show the logical interface ids you will use to identify the LAGs
in subsequent commands. Assume that lag_10 is assigned id 1/1 and lag_20 is assigned id 1/2..
(Console) #show port-channel all
Port-
Log.
Channel
Intf
Name
------ --------------- ------ ---- ---- ------ ------- ------ --------- ------
1/1
lag_10
1/2
lag_20
2-2
Subnet 3
Port 1/0/8
Port 1/0/9
LAG 20
LAG_20
Subnet 3
Link
Adm. Trap
Link
Mode Mode
Down
En.
En.
Down
En.
En.
v1.0, June 2010
STP
Mbr
Mode
Type
Ports
Dis.
Dynamic
Dis.
Dynamic
Port
Port
Speed
Active
Link Aggregation
Advertisement
Table of Contents
