NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch Software Administration Manual page 381

ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
Here the max datagram size is default 1400. It can be modified to a value between 200 to 9116 using the
command sflow receiver 1 maxdatagram <size>.
(GSM7328S) #show sflow receivers
Receiver Owner Time out
Index String
-------- -------- ---------- ------------ ----- ------------------------------
1 NetMonit 31535988
2
3
4
5
6
7
8
(GSM7328S) #
Configure sampling ports sFlow receiver index, sampling rate, sampling max header size. It has to be
repeated for all the ports to be sampled.
(Netgear Switch) (Config)# interface 1/0/1
(Netgear Switch) (Interface 1/0/1)# sflow sampler 1
(Netgear Switch) (Interface 1/0/1)# sflow sampler rate 1024
(Netgear Switch) (Interface 1/0/1)# sflow sampler maxheadersize 64
View the sampling port configurations.
(GSM7328S) #show sflow samplers
Sampler
Data Source
----------- ---------------
1/0/1
Web Interface: Configuring Statistical Packet-based Sampling with sFlow
1. Configure the sFlow receiver IP address.
a. From the main menu, select Monitoring > sFlow > Advanced > sFlow Receiver Configuration.
b. Select the check box against 1.
c. Enter Receiver Owner as NetMonitor.
d. Enter Receiver Timeout as 31536000.
18-7
Max Datagram Port
Size
1400
0 1400
0 1400
0 1400
0 1400
0 1400
0 1400
0 1400
Receiver
Index
1
v1.0, June 2010
IP Address
6343 192.168.10.2
6343 0.0.0.0
6343 0.0.0.0
6343 0.0.0.0
6343 0.0.0.0
6343 0.0.0.0
6343 0.0.0.0
6343 0.0.0.0
Packet
Sampling Rate
-----------------
1024
Max Header
Size
------------------
64
SNMP