Assign Ports To Vlan2 - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch Software Administration Manual
7000 series managed switch administration guide for software version 8.0.3
Hide thumbs
Also See for GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch:
- User manual (628 pages) ,
- Cli manual (788 pages) ,
- Hardware installation manual (39 pages)
Table of Contents
Advertisement
ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
•
In the VLAN Name field, enter VLAN3
•
Select Static in the VLAN Type field.
c.
Click Add.
Assign Ports to VLAN2
This sequence shows how to assign ports to VLAN2, specify that frames will always be transmitted tagged
from all member ports, and that untagged frames will be rejected on receipt.
CLI: Assigning Ports to VLAN2
(Netgear Switch) #config
(Netgear Switch) (Config)#interface range 1/0/1-1/0/2
(Netgear Switch) (conf-if-range-1/0/1-1/0/2)#vlan participation include 2
(Netgear Switch) (conf-if-range-1/0/1-1/0/2)#vlan acceptframe vlanonly
(Netgear Switch) (conf-if-range-1/0/1-1/0/2)#vlan pvid 2
(Netgear Switch) (conf-if-range-1/0/1-1/0/2)#exit
(Netgear Switch) (Config)#vlan port tagging all 2
(Netgear Switch) (Config)#
Web Interface: Assigning Ports to VLAN2
To use the Web interface to configure the managed switch, proceed as follows:
1. Assign ports to VLAN 2.
a.
From the main menu, select Switching > VLAN >Advanced > VLAN Membership. A screen
similar to the following displays.
Figure 1-4
b. Select 2 in the VLAN ID field
1-4
v1.0, June 2010
Virtual LANs
Advertisement
Table of Contents
