Assign Vlan3 As The Default Vlan For Port 1/0/2 - NETGEAR GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch Software Administration Manual
7000 series managed switch administration guide for software version 8.0.3
Hide thumbs
Also See for GSM7252PS - ProSafe 52 Ports Gigabit Ethernet L2 Managed Stackable Switch:
- User manual (628 pages) ,
- Cli manual (788 pages) ,
- Hardware installation manual (39 pages)
Table of Contents
Advertisement
ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
a.
From the main menu, select Switching > VLAN> Advanced > Port PVID Configuration. A screen
similar to the following displays.
Figure 1-7
b. Under PVID Configuration, scroll down to interface 1/0/4 and select the checkbox for that
interface. Now 1/0/4 appears in the Interface field at the top.
c.
Under PVID Configuration, select Admit All in the Acceptable Frame Type polyhedron field.
d. Click Apply to save the settings.
Assign VLAN3 as the Default VLAN for Port 1/0/2
This example shows how to assign VLAN 3 as the default VLAN for port 1/0/2.
CLI: Assigning VLAN3 as the Default VLAN for Port 1/0/2
(Netgear Switch) #config
(Netgear Switch) (Config)#interface 1/0/2
(Netgear Switch) (Interface 1/0/2)#vlan pvid 3
(Netgear Switch) (Interface 1/0/2)#exit
(Netgear Switch) (Config)#exit
Web Interface: Assigning VLAN3 as the Default VLAN for Port 1/0/2
To use the Web interface to configure the managed switch, proceed as follows:
1. Assign VLAN 3 as the default VLAN for port 1/0/2.
Virtual LANs
v1.0, June 2010
1-7
Advertisement
Table of Contents
