Event Logs - NETGEAR GS728TS Admin Manual

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches

Event Logs

Use the Event Log page to display the event log, which is used to hold error messages for
catastrophic events. After the event is logged and the updated log is saved in flash memory,
the switch will be reset. The log can hold at least 2,000 entries and is erased when an
attempt is made to add an entry after it is full. The event log is preserved across system
resets.
To access the Event Log page, click the Monitoring > Logs tab, and then click the Event Logs
link.
The following table describes the Event Log information displayed on the screen.
Field
Entry
Type
Filename
Line
Task ID
Code
Time
Use the buttons at the bottom of the page to perform the following actions:
• Click Clear to clear the messages out of the Event Log.
• Click Refresh to refresh the data on the screen and display the most current information.
Description
The number of the entry within the event log. The most recent entry is first.
Specifies the type of entry.
The GS728TS, GS728TPS, GS752TS, or GS752TPS source code filename
identifying the code that detected the event.
The line number within the source file of the code that detected the event.
The OS-assigned ID of the task reporting the event.
The event code passed to the event log handler by the code reporting the
event.
The time the event occurred, measured from the previous reset.
277