Event Logs - NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch Admin Manual

GS716Tv2 and GS724Tv3 Software Administration Manual
Table 6-12. Trap Logs
Field
Log
System Up Time
Trap
2. Click Clear Counters to clear all the counters. This resets all statistics for the trap logs to the
default values.

Event Logs

Use the Event Log page to display the event log, which is used to hold error messages for
catastrophic events. After the event is logged and the updated log is saved in flash memory, the
switch will be reset. The log can hold at least 2,000 entries and is erased when an attempt is made
to add an entry after it is full. The event log is preserved across system resets.
To access the Event Log page:
1. Click the Monitoring  Logs tab, and then click the Event Logs link.
Figure 6-9
6-22
Description
The sequence number of this trap.
The time at which this trap occurred, expressed in days, hours, minutes and
seconds since the last reboot of the switch.
Information identifying the trap.
v1.0, July 2009
Monitoring the System