Vlans; Vlan Configuration - NETGEAR GS728TS Admin Manual

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches

VLANs

Adding Virtual LAN (VLAN) support to a Layer 2 switch offers some of the benefits of both
bridging and routing. Like a bridge, a VLAN switch forwards traffic based on the Layer 2
header, which is fast, and like a router, it partitions the network into logical segments, which
provides better administration, security and management of multicast traffic.
By default, all ports on the switch are in the same broadcast domain. VLANs electronically
separate ports on the same switch into separate broadcast domains so that broadcast
packets are not sent to all the ports on a single switch. When you use a VLAN, users can be
grouped by logical function instead of physical location.
Each VLAN in a network has an associated VLAN ID, which appears in the IEEE 802.1Q tag
in the Layer 2 header of packets transmitted on a VLAN. An end station may omit the tag, or
the VLAN portion of the tag, in which case the first switch port to receive the packet may
either reject it or insert a tag using its default VLAN ID. A given port may handle traffic for
more than one VLAN, but it can only support one default VLAN ID.
From the VLAN link, you can access the following pages:
•

VLAN Configuration

• VLAN Membership Configuration
• Port VLAN ID Configuration
• MAC Based VLAN
• Protocol Based VLAN Group Configuration
• Protocol Based VLAN Group Membership
VLAN Configuration
Use the VLAN Configuration page to define VLAN groups stored in the VLAN membership
table. The GS728TS, GS728TPS, GS752TS, and GS752TPS each support up to 256
VLANs. Three VLANs are created by default:
• VLAN 1 is the default VLAN of which all ports are members.
• VLAN 2 is for voice traffic.
• VLAN 3 is for Auto-Video traffic.
To display the VLAN Configuration page, lick Switching> VLAN > Basic > VLAN
Configuration.
on page 110
on page 112
on page 113
on page 114
110
on page 115
on page 116