Ip Binding Table - NETGEAR GS728TS Admin Manual

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches

IP Binding Table

Use the IP Binding Table page to view or delete the IP ACL bindings.
To display the IP Binding Table, click Security > ACL > Advanced > Binding Table.
The following table describes the information displayed in the IP ACL Binding Table.
Field
Interface
Direction
ACL Type
ACL ID/Name
Sequence Number
To delete an IP ACL-to-interface binding, select the check box next to the interface and click
Delete. Click Cancel to abandon any changes.
Description
Displays the interface to which the IP ACL is bound.
Specifies the packet filtering direction for ACL. The only valid direction is
Inbound, which means the IP ACL rules are applied to traffic entering the
port.
Displays the type of ACL assigned to selected interface and direction.
Displays the ACL number or name that identifies the ACL assigned to
selected interface and direction.
Displays the Sequence Number signifying the order of specified ACL relative
to other ACLs assigned to selected interface and direction.
254