Event Logs - NETGEAR GS716T Software Administration Manual

Field
Log
System Up Time
Trap
Click Clear Counters to clear all the counters. This resets all statistics for the trap logs to the
default values.

Event Logs

Use the Event Log page to display the event log, which is used to hold error messages for
catastrophic events. After the event is logged and the updated log is saved in flash memory,
the switch will be reset. The log can hold at least 2,000 entries and is erased when an
attempt is made to add an entry after it is full. The event log is preserved across system
resets.
To access the Event Log page, click the Monitoring  Logs tab, and then click the Event
Logs link.
The following table describes the Event Log information displayed on the screen.
Field
Entry
Type
Filename
Line
Task ID
220 | Chapter 6: Monitoring the System
GS716Tv2 and GS724Tv3 Software Administration Manual
Description
The sequence number of this trap.
The time at which this trap occurred, expressed in days, hours, minutes, and
seconds since the last reboot of the switch.
Information identifying the trap.
Description
The number of the entry within the event log. The most recent entry is first.
Specifies the type of entry.
The GS716T or GS724T source code filename identifying the code that
detected the event.
The line number within the source file of the code that detected the event.
The OS-assigned ID of the task reporting the event.