Port Authentication - NETGEAR GS728TS Admin Manual

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
3. Enable or disable Dynamic VLAN Creation Mode:
• Enable. If the RADIUS assigned VLAN does not exist on the switch, allow the switch to
dynamically create the assigned VLAN.
• Disable. The switch will not create a RADIUS-assigned VLAN for a client if it does not
already exist.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5. If you change the settings, click Apply to apply the new settings to the system.

Port Authentication

Use the Port Authentication page to enable and configure port access control on one or more
ports.
To access the Port Authentication page, click Security > Port Authentication, and then click
the Advanced > Port Authentication link.
Note: Use the horizontal scroll bar at the bottom of the browser to view all
the fields on the Port Authentication page. The following screen
shots show the left and right halves of the Port Authentication page.
220