Igmp Snooping Vlan Configuration - NETGEAR GS728TS Admin Manual

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
The following table describes the fields in the IGMP Snooping Table.
Field
MAC Address
VLAN ID
Type
Description
Interface
Use the buttons at the bottom of the page to perform the following actions:
• Click Clear to clear one or all of the IGMP Snooping entries.
• Click Refresh to reload the page and display the most current information.
• Click Cancel to cancel the configuration on the screen and reset the data on the screen
to the latest value of the switch.

IGMP Snooping VLAN Configuration

Use the IGMP Snooping VLAN Configuration page to configure IGMP snooping settings for
VLANs on the system.
To access the IGMP Snooping VLAN Configuration page, click Switching> Multicast > IGMP
Snooping > IGMP Snooping VLAN Configuration.
Description
A multicast MAC address for which the switch has forwarding and/or filtering
information. The format is 6 two-digit hexadecimal numbers that are
separated by colons, for example, 01:00:5e:45:67:89.
A VLAN ID for which the switch has forwarding and filtering information.
This displays the type of the entry. Static entries are those that are
configured by the end user. Dynamic entries are added to the table as a
result of a learning process or protocol.
The text description of this multicast table entry. Possible values are
Management Configured, Network Configured, and Network Assisted.
The list of interfaces that are designated for forwarding (Fwd) and filtering
(Flt) for the associated address.
142