NETGEAR GS728TS Admin Manual page 87

Gigabit smart switches
Hide thumbs Also See for GS728TS:
Table of Contents

Advertisement

GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
A popup window displays information for the selected port.
The following table describes the detailed local information that displays for the selected port.
Field
Managed Address
Address SubType
Address
Interface SubType
Interface Number
MAC/PHY Details
Auto-Negotiation Supported Specifies whether the interface supports port-speed auto-negotiation. The
Auto-Negotiation Enabled
Auto Negotiation Advertised
Capabilities
Operational MAU Type
Description
Displays the type of address the management interface uses, such as an IPv4
address.
Displays the address used to manage the device.
Displays the port subtype.
Displays the number that identifies the port.
possible values are True or False.
Displays the port speed auto-negotiation support status. The possible values
are True (enabled) or False (disabled).
Displays the port speed auto-negotiation capabilities such as 1000BASE-T
half-duplex mode or 100BASE-TX full-duplex mode.
Displays the Medium Attachment Unit (MAU) type. The MAU performs
physical layer functions, including digital data conversion from the Ethernet
interface collision detection and bit injection into the network.
87

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs752tpsGs752tsGs728tps

Table of Contents