Understanding The User Interfaces; Using The Web Interface - NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch Admin Manual

Understanding the User Interfaces

GS716T/GS724T software includes a set of comprehensive management functions for configuring
and monitoring the system by using one of the following methods:
• Web user interface
• Simple Network Management Protocol (SNMP)
Each of the standards-based management methods allows you to configure and monitor the
components of the GS716T/GS724T software. The method you use to manage the system depends
on your network size and requirements, and on your preference.
The GS716Tv2 and GS724Tv3 Software Administration Manual describes how to use the Web-
based interface to manage and monitor the system.

Using the Web Interface

To access the switch by using a Web browser, the browser must meet the following software
requirements:
• HTML version 4.0, or later
• HTTP version 1.1, or later
• Java Runtime Environment 1.6 or later
Use the following procedures to log on to the Web interface:
1. Open a Web browser and enter the IP address of the switch in the Web browser address field.
2. The factory default password is password. Type the password into the field on the login
screen, as shown in
sensitive.
Getting Started
GS716Tv2 and GS724Tv3 Software Administration Manual
Figure 1-6 on page 1-10, and then click Login. Passwords are case
v1.0, July 2009
1-9