Igmp Snooping Interface Configuration - NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch Admin Manual

GS716Tv2 and GS724Tv3 Software Administration Manual
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
3. If you make any configuration changes, click Apply to apply the new settings to the switch.
Configuration changes take effect immediately.

IGMP Snooping Interface Configuration

Use the IGMP Snooping Interface Configuration page to configure IGMP snooping settings on
specific interfaces.
To access the IGMP Snooping Interface Configuration page:
1. Click Switching Multicast  IGMP Snooping  IGMP Snooping Interface
Configuration in the navigation tree.
Figure 3-22
Table 3-20. IGMP Snooping Interface Configuration Fields
Field
Interface
Admin Mode
3-34
Description
Lists all physical, VLAN, and LAG interfaces. Select the interface you
want to configure.
Select the interface mode for the selected interface for IGMP Snooping
for the switch from the menu. The default is Disable.
v1.0, July 2009
Configuring Switching Information