Smartwizard Discovery In A Network Without A Dhcp Server - NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch Admin Manual

GS716Tv2 and GS724Tv3 Software Administration Manual
Figure 1-2
Use your Web browser to manage your switch. The default password is password. Then use
this page to proceed to management of the switch covered in
page 1-9.

SmartWizard Discovery in a Network without a DHCP Server

This section describes how to set up your switch in a network without a DHCP server, and is
divided into the following tasks:
• "Manually Assigning Network Parameters" on page 1-5
• "Configuring the Network Settings on the Administrative System" on page 1-6
1-4
v1.0, July 2009
"Using the Web Interface" on
Getting Started