Ip Binding Table - NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch Admin Manual

GS716Tv2 and GS724Tv3 Software Administration Manual

IP Binding Table

Use the IP Binding Table page to view or delete the IP ACL bindings.
To display the IP Binding Table:
1. Click Security  ACL, then click the Advanced  Binding Table link.
Figure 5-34
Table 5-38. IP ACL Binding Table Fields
Field
Interface
Direction
ACL Type
ACL ID
Seq No.
2. To delete the binding, select the check box next to the interface and click Delete.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
5-56
Description
Shows the interface to which the IP ACL is bound.
Specifies the packet filtering direction for ACL. The only valid direction
is Inbound, which means the IP ACL rules are applied to traffic entering
the port.
Displays the type of ACL assigned to selected interface and direction.
Displays the ACL Number identifying the ACL assigned to selected
interface and direction.
Displays the Sequence Number signifying the order of specified ACL
relative to other ACLs assigned to selected interface and direction.
v1.0, July 2009
Managing Device Security