Server Log Configuration - NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch Admin Manual

Server Log Configuration

Use the Server Log Configuration page to allow the switch to send log messages to the remote
logging hosts configured on the system.
To access the Server Log Configuration page:
1. Click the Monitoring  Logs tab, and then click the Server Log link.
Figure 6-7
Table 6-9. Server Log Configuration Fields
Field
Admin Status
Local UDP Port
Messages Relayed
Messages Ignored
Monitoring the System
GS716Tv2 and GS724Tv3 Software Administration Manual
Description
Specifies whether to send log messages to the remote syslog hosts configured
on the switch:
• Enable: Messages will be sent to all configured hosts (syslog collectors or
relays) using the values configured for each host.
• Disable: Stops logging to all syslog hosts. Disable means no messages will
be sent to any collector/relay.
Specifies the port on the switch from which syslog messages are sent. The
default port is 514.
The number of messages forwarded by the syslog function to a syslog host.
Messages forwarded to multiple hosts are counted once for each host.
The number of messages that were ignored.
v1.0, July 2009
6-19