Mac Binding Table - NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch Admin Manual

Table 5-32. MAC ACL Rule Configuration Fields
Field
ACL ID
Direction
Sequence Number
Port Selection Table
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
3. Click Apply to save any changes to the running configuration.

MAC Binding Table

Use the MAC Binding Table page to view or delete the MAC ACL bindings.
To display the MAC Binding Table:
Managing Device Security
GS716Tv2 and GS724Tv3 Software Administration Manual
Description
Select an existing MAC ACL.
Specifies the packet filtering direction for ACL. The only valid direction
is Inbound, which means the MAC ACL rules are applied to traffic
entering the port.
An optional sequence number may be specified to indicate the order of
this access list relative to other access lists already assigned to this
interface and direction. A low number indicates high precedence order.
If a sequence number is already in use for this interface and direction,
the specified access list replaces the currently attached access list
using that sequence number. If the sequence number is not specified
by the user, a sequence number that is one greater than the highest
sequence number currently in use for this interface and direction will be
used. Valid range is 1–4294967295.
Specifies list of all available valid interfaces for ACL binding. All non-
routing physical interfaces and interfaces participating in LAGs are
listed.
v1.0, July 2009
5-45