Mac Binding Configuration - NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch Admin Manual

GS716Tv2 and GS724Tv3 Software Administration Manual
3. To delete a rule, select the check box associated with the rule and click Delete.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
5. To change a rule, select the check box associated with the rule, change the desired fields and
click Apply.

MAC Binding Configuration

When an ACL is bound to an interface, all the rules that have been defined are applied to the
selected interface. Use the MAC Binding Configuration page to assign MAC ACL lists to ACL
Priorities and Interfaces.
To display the MAC Binding Configuration page:
1. Click Security  ACL, then click the Basic  MAC Binding Configuration link.
Figure 5-27
5-44
v1.0, July 2009
Managing Device Security