Upload File From Switch - NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch Admin Manual

1. Click Maintenance  Reset  Factory Default in the navigation tree.
Figure 7-2
2. Click Cancel to cancel the operation on the screen and reset the data on the screen to the latest
value of the switch.
3. Click Apply to restore the factory default settings. The action occurs immediately.

Upload File From Switch

Use the File Upload page to upload configuration (ASCII) and image (binary) files from the switch
to the TFTP server.
Maintenance
GS716Tv2 and GS724Tv3 Software Administration Manual
v1.0, July 2009
7-3