Exit - NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch Admin Manual

GS716Tv2 and GS724Tv3 Software Administration Manual
Figure 1-5
2. Enter the following values into the appropriate places in the form:
• Product Assigned Firmware. The location of the new firmware. If you do not know the
location, you can click Browse to locate the file.
• Upgrade Password. Enter your password, then click Apply; the default password is
'password'.
• Start Upgrade. Shows upgrading in progress.
3. Click Start to begin loading the upgrade. The system software is automatically loaded. When
the process is complete, the switch automatically reboots.
Note: It is important that you do not power-off the PC or the Switch while the Firmware
upgrade is in progress.

Exit

Click Exit from the Switch Setting section to close the SmartWizard Discovery utility.
1-8
v1.0, July 2009
Getting Started