GS716Tv2 and GS724Tv3 Software Administration Manual
Figure 3-11
Table 3-10. Spanning Tree Switch Configuration/Status Fields
Field
Spanning Tree State
STP Operation Mode
Configuration Name
Configuration Revision
Level
Configuration Digest Key
BPDU Flooding
Bridge Identifier
3-18
Description
Enables or disables Spanning Tree operation on the switch.
Specifies the Force Protocol Version parameter for the switch. Options
are:
• STP (Spanning Tree Protocol): IEEE 802.1d
• RSTP (Rapid Spanning Tree Protocol): IEEE 802.1w
• MSTP (Multiple Spanning Tree Protocol): IEEE 802.1s
Name used to identify the configuration currently being used. It may be
up to 32 alphanumeric characters.
Number used to identify the configuration currently being used. The
values allowed are between 0 and 65535. The default value is 0.
Number used to identify the configuration currently being used.
Enables or disables BPDU Flooding. When this feature is enabled,
BPDU packets arriving at this port are flooded to other ports if STP is
disabled.
The bridge identifier for the CST. It is made up using the bridge priority
and the base MAC address of the bridge.
v1.0, July 2009
Configuring Switching Information