NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch Admin Manual page 75

1. Click Switching VLAN  Basic  VLAN Configuration in the navigation tree.
Figure 3-7
Table 3-7. VLAN Configuration Fields
Field
VLAN ID
VLAN Name
VLAN Type
Reset Configuration
2. Click Add to add a new VLAN to the switch.
3. Click Delete to delete a selected VLAN from the switch.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
Configuring Switching Information
GS716Tv2 and GS724Tv3 Software Administration Manual
Description
Specify the VLAN Identifier for the new VLAN. (You can only enter data
in this field when you are creating a new VLAN.) The range of the VLAN
ID is 1–4093.
Use this optional field to specify a name for the VLAN. It can be up to 32
alphanumeric characters long, including blanks. The default is blank.
VLAN ID 1 is always named "Default."
This field identifies the type of the VLAN you are configuring. You
cannot change the type of the default VLAN (VLAN ID = 1) because the
the type is always Default. When you create a VLAN on this page, its
type will always be Static.
This resets all the VLAN configurations. If the Management VLAN is set
to a non-default VLAN (VLAN 1), it is automatically set to 1 after a Reset
Configuration.
v1.0, July 2009
3-11