Configuring Hunt Groups (Optional) - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Connecting the Equipment
Configuring Inbound Call Routing
STEP 2
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
number of seconds is longer than the time it takes for voice mail to be
activated (default 20 seconds). To ensure that the call is forwarded to
the Auto Attendant, set the specified number of seconds to a smaller
number.
•
If you need to add a new hunt group, click Edit Hunt Group. Continue with the
procedure "Configuring Hunt Groups (Optional)," on page
hunt group, you return to this page to select your call routing option.
•
If you want to route the call to the Auto Attendant immediately, choose the third
option.
Click Next to display the Localization page. Continue with the procedure
"Localizing the SPA400 Voice Mail Prompts (Optional)," on page

Configuring Hunt Groups (Optional)

The Configure SPA9000 Hunt Groups page appears after you click Edit Hunt
Group on the Configure the SPA9000 Call Routing Rule page.
The Wizard guides you through the process of creating hunt groups. A hunt group
is a feature that causes an incoming call to ring a group of stations simultaneously
or in a chosen sequence.
4
73. After you add a
94.
73