Connecting the Equipment
Connecting and Configuring the Equipment (New Installation)
STEP 4
STEP 5
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
Follow the instructions on the SPA9000 Network Installation page to connect the
SPA9000.
•
Do not connect anything to the SPA9000's ETHERNET port. Use only the
SPA9000's INTERNET port. Refer to the
Guide
for more information about the ETHERNET port.
•
You will not hear a dial tone from the analog phone when you take it off-hook.
To use the integrated voice response (IVR) system, press the asterisk key four
times:
****
Click Next to continue to the next page. Continue with the next procedure,
"Installing the SPA400 (Optional)," on page
SPA9000 Voice System Administration
53.
4
52