Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual page 29

Getting Started
Introducing Components of the SPA9000 Voice System
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
LED/Port
ETHERNET (1-24)
G1-G2
mini-GBIC (1-2)
SLM224P Back Panel
The back panel has one port, the Power port, which is used to connect the power
cord.
Description
The Switch is equipped with 24 auto-sensing, Ethernet
network ports, which use RJ-45 connectors. The Fast
Ethernet ports support network speeds of 10 Mbps,
100 Mbps, or 1000 Mbps. They can operate in half-
and full-duplex modes. Auto-sensing technology
enables each port to automatically detect the speed of
the device connected to it (10 Mbps, 100 Mbps, or
1000 Mbps), and adjust its speed and duplex
accordingly.
The switch is equipped with 2 auto-sensing 10 Mbps,
100 Mbps, or 1000 Mbps Gigabit Ethernet network
ports, which use RJ-45 connectors. They can operate
in half- and full-duplex modes.
The mini-GBIC (gigabit interface converter) port is a
connection point for a mini-GBIC expansion module, so
the switch can be uplinked via fiber to another switch.
1
27