Connecting And Configuring The Equipment (New Installation); Starting The Wizard - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Connecting the Equipment

Connecting and Configuring the Equipment (New Installation)

Connecting and Configuring the Equipment (New Installation)
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
Refer to this section if you have a new installation and configuration to perform.
This section assumes that:
•
You have some basic networking knowledge.
•
The equipment is not connected or powered on.
•
You are configuring an Internet telephony service provider (ITSP) account and a
public switched telephone network (PSTN) account.
•
You have completed the Site Survey. See

Starting the Wizard

Double-click the SetupWizard.exe file to start the Setup Wizard. When the
Welcome page appears, click Next to continue.
Appendix A, "Installation Workbook."
4
48