Replacing A Phone (Experts Only) - Linksys SPA921 - Cisco - IP Phone Installation And Configuration Manual

Maintaining Your SPA9000 Voice System

Replacing a Phone (Experts Only)

STEP 8
STEP 9
Replacing a Phone (Experts Only)
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
SPA9000 Voice System Installation and Configuration Guide for Setup Wizard
If you click Add New, a dialog box appears. Enter a name and extension number. If
you want this station to have voice mail, select the Voice Mail check box, and then
enter the Mailbox ID and Mailbox PIN. After entering the information, click OK.
Wait while the Wizard displays progress messages and reboots the phone. The
assigned name and extension number appear on the phone display.
Click OK when the Submit Succeeded message appears.
Replace a phone with an identical replacement model as follows:
Disconnect the phone to be replaced and note its MAC address.
Install the new phone and note its MAC address.
Locate the most recent backup for the replaced phone.
Copy the backup file and save it using the MAC address of the new phone.
Perform a factory default reset on the new phone.
Navigate to the Wizard's Main Menu, select Save / Load Configuration.
Click Next to display the Save / Load Configuration Page.
Click Refresh List to cause the Wizard to locate the newly added phone.
6
139